Title: PC-Oscilloscope 6022BE [Print this page] Author: Frank Time: 2017-1-17 11:40 Title: PC-Oscilloscope 6022BE Device not being recognised in Windows 10.No lights come on at the front of the Oscilloscope when plugged into any given USB port.
Which is odd, because the problem was not observed when Computer was booted up using Windows 7 environment.
On further inspection:Device will power up correctly when plugged into the USB Port, and the Computer is put through a warm boot with the PC-Oscilloscope hooked up to the system.
As soon as the device is unplugged, and then reconnected into the same port, Windows 10 Device Manager flags "Unknown Device",
the operation light remains off and your PC-Scope remains unusable.
Conclusion: There seem to be hardware recognition issues with 6022BE, specifically involving Windows 10
Author: amy Time: 2017-1-17 11:43
Please download the latest driver on our official website: http://www.hantek.com/en/ProductDetail_2_31.html
And refer to the document to install the driver.
[attach]1356[/attach]
Welcome to Electronic Engineer Discuss (https://www.eediscuss.com/)