|
发表于 2021-7-15 14:14:44
|
显示全部楼层
Edited by dtp at 2021-7-15 14:27
Meanwhile, I have switched to the Firmware of Joy-It, in order to have a German and French menu language instead of Chinese. However, the update process is only possible utilizing an ST-Link adapter. In addition, you have to open the 2D72, which might lead to a warranty loss. If you are interested in how to proceed, please see here. However, the description was created in German language.
If you are interestid in doing these steps, I recommend to use the Upload function of DfuSe Demo prior to the upgrade, in order to save the current firmware into a respective dfu file on your personal computer. This might be helpfull, if something does not work properly. In this case, you can reflash the MCU again with the Boot Loader by e.g. using an FTDI adpater as shown here.
By the way, if the Joy-It Firmware does not suit you, you can easily go back to the Hantek Firmware by using DfuSe Demo as described by amy within the first post of this thread.
|
|