Hantek1833C Help
bought a part and he is very mistaken after calibration.numbers can change randomly.
watch the video
https://yadi.sk/i/7fYfxFnJ1_v59g
https://yadi.sk/i/zn3E1IlLEg1crQ
https://yadi.sk/i/h5HFAmCq4tT6xw
firmware update? give me please
Sorry for not being able to reply to the post in time, the problem has been feedback to the engineer, I will reply to you as soon as the result is available.
waiting for an answer
Calibration should be performed in both short circuit and open circuit. did you do this?
I did open and closed calibration
The device is operating chaotically.
and it’s not convenient that after turning off the calibration needs to be done again
I will make a video and post it.
jumps 0.00 ** it turns out the device is 0.00 and not how I wanted 0.0000
Why is the device inside without shielding? with such accuracy it is necessary
users need to calibration in both short circuit and open circuit. from the video, i see it's correct in short circuit. But what is your meaning? numbers can change randomly occurred after open circuit calibration?
Pages:
[1]
2