baldy Publish time 2021-4-28 17:12:58

DSO4102C Bode Assisstant

I have problem in my DSO 4102C: I cannot switch on the Bode Assistant option.

Where the problem is?

Baldy

farzins Publish time 2021-5-7 15:30:05




Please press "Utility->F6" button to page 3/3, and press "Option.." softkey, then press "Bode Assiant" softkry.
More information, please refer to the manual.

baldy Publish time 2021-5-7 16:46:48

Thank you for info.

But I travelled to point Bode Assistant and I cannot switch from Off to On. There is no reaction.

ying Publish time 2021-5-14 14:31:50

baldy replied at 2021-5-7 16:46
Thank you for info.

But I travelled to point Bode Assistant and I cannot switch from Off to On. The ...

   

baldy Publish time 2021-12-16 21:31:07

Thank you/ I found in my scope.

But where I can found decription of this function (so in DSO4000C manual there is no...)

amy Publish time 2021-12-18 16:11:33

Press V0 to refresh the values.
1.The frequency of the two channels must be the same.
2.According to the decibel and phase difference and frequency, users can draw the amplitude frequency diagram, phase frequency diagram and the amplitude phase diagram.



Pages: [1]
View full version: DSO4102C Bode Assisstant