Edited by WisdomAugust at 2021-10-11 09:36
4.7.4 TRIGger: PULSe: WIDth
Command:TRIGger: PULSe:WIDth <value>:TRIGger: PULSe:WIDth?
DescriptionSet or query the pulse width triggering time.
Parameters:<value> ::=pulse width trigger (in second)
ReturnThe query returns the pulse width value in scientific notation
Example:TRIGger: PULSe:WIDth 0.000003 /*Set the pulse width value to 3μs*/:TRIGger: PULSe:WIDth? /*The query returns 3.000000e-06*/
4.7.5 TRIGger: PULSe: LEVel
Command:TRIGger: PULSe: LEVel <level>:TRIGger: PULSe: LEVel?
DescriptionSet or query the trigger level when pulse width trigger.
Parameters:<level> ::=trigger level value ( in V)
ReturnThe query returns the trigger level value in scientific notation.
Example:TRIGger: PULSe: LEVel 0.16 /*Set the trigger level to 160mV*/:TRIGger: PULSe: LEVel? /*The query returns 1.600000e-01*/
Edited by WisdomAugust at 2021-10-12 10:23
4.8 TRIGger:SLOPe
Command Listl TRIGger:SLOPe:SOURcel TRIGger:SLOPe: POLarityl TRIGger:SLOPe:WHENl TRIGger:SLOPe:WIDthl TRIGger:SLOPe:ALEVell TRIGger:SLOPe:BLEVel
4.8.1 TRIGger:SLOPe:SOURce
Command:TRIGger:SLOPe:SOURce <source>:TRIGger:SLOPe:SOURce?
DescriptionSet or query the trigger source of slope trigger
Parameters:<source> ::= < CHANnel1 | CHANnel2 | CHANnel3 | CHANnel4>
ReturnThe query returns CHANnel1, CHANnel2, CHANnel3, CHANnel4
Example:TRIGger:SLOPe:SOURce CHANnel1 /*Set trigger source to CH1*/:TRIGger:SLOPe:SOURce? /*The query returns CHANnel1*/
4.8.2 TRIGger:SLOPe: POLarity
Command:TRIGger:SLOPe: POLarity <polarity>:TRIGger:SLOPe: POLarity?
DescriptionSet or query the trigger polarity of the slope trigger.
Parameters:<polarity> ::= < POSItive | NEGAtive>
StatePOSItive: Positive slope trigger NEGAtive: negative slope trigger
ReturnThe query returns POSItive, NEGAtive
Example:TRIGger:SLOPe: POLarity POSItive /*Set positive slope trigger*/:TRIGger:SLOPe: POLarity? /*The query returns POSItive*/
Good job!
Thank you!
I hope you can also take care to fix some user reported bugs on that thread:
https://www.eevblog.com/forum/testgear/new-hantek-dso2x1x-models/775/
Goodluck!
Edited by WisdomAugust at 2021-10-13 08:20
4.8.3 TRIGger:SLOPe:WHEN
Command:TRIGger:SLOPe:WHEN <when>:TRIGger:SLOPe:WHEN?
DescriptionSet or query the trigger condition of the slope trigger.
Parameters:<when> ::= < EQUAl| NEQUal| GREAt| LESS>
State?EQUAl = (equal to time value): Only when the positive or negative pulse width of the input signal is equal to the set pulse width can it trigger. error is 5%] ?NEQUal! = (Not equal to time value): Only when the positive or negative pulse width of the input signal is not equal to the set pulse width, can the width error be 5%] be triggered. ?GREAt > (greater than the time value): Only when the positive or negative pulse width of the input signal is greater than the set pulse width can it trigger . ?LESS <(less than time value): Only when the positive or negative pulse width of the input signal is less than the set pulse width can the 5%] be triggered.
ReturnThe query returns EQUAl, NEQUal, GRAt, LESS
Example:TRIGger:SLOPe:WHEN NEQUal /*Set trigger condition to NEQUal*/:TRIGger:SLOPe:WHEN? /*The query returns NEQUal*/
4.8.4 TRIGger:SLOPe:WIDth
Command:TRIGger:SLOPe:WIDth <value>:TRIGger:SLOPe:WIDth?
DescriptionSet or query the trigger condition of the slope trigger.
Parameters:<value> ::=trigger condition value (in second)
ReturnThe query returns the time value in scientific notation.
Example:TRIGger:SLOPe:WIDth 0.000003 /*Set the width value to 3μs*/:TRIGger:SLOPe:WIDth? /*The query returns 3.000000e-06*/
Edited by WisdomAugust at 2021-10-14 08:23
4.8.5 TRIGger:SLOPe:ALEVel
Command:TRIGger:SLOPe:ALEVel <level>:TRIGger:SLOPe:ALEVel?
DescriptionSet or query the upper limit of the trigger level when the slope triggers.
Parameters:<level> ::=trigger level upper limit value (in V)
ReturnThe query returns the upper limit value of the trigger level in scientific notation.
Example:TRIGger:SLOPe:ALEVel 0.16 /*Set the trigger level to 160mV*/:TRIGger:SLOPe:ALEVel? /*The query returns 1.600000e-01*/
4.8.6 TRIGger:SLOPe:BLEVel
Command:TRIGger:SLOPe:BLEVel <level>:TRIGger:SLOPe:BLEVel?
DescriptionSet or query the lower limit of the trigger level when the slope triggers.
Parameters:<level> ::=trigger level lower limit value (in V)
ReturnThe query returns the lower limit value of the trigger level in scientific notation.
Example:TRIGger:SLOPe:BLEVel 0.16 /*Set the trigger level to lower limit*/:TRIGger:SLOPe:BLEVel? /*The query returns 1.600000e-01*/
Edited by WisdomAugust at 2021-11-2 09:47
4.9 TRIGger:TVCommand Listl TRIGger:TV:SOURcel TRIGger:TV: POLarityl TRIGger:TV:MODEl TRIGger:TV: LINEl TRIGger:TV:STANdardl TRIGger:VIDeo: LEVel
4.9.1 TRIGger:TV:SOURce
Command:TRIGger:TV:SOURce <source>:TRIGger:TV:SOURce?
DescriptionSelect or query the trigger source of the video trigger.
Parameters:<source> ::= < CHANnel1 | CHANnel2 | CHANnel3 | CHANnel4>
ReturnThe query returns CHANnel1, CHANnel2, CHANnel3, CHANnel4
Example:TRIGger:TV:SOURce CHANnel1 /*Settrigger source to CH1*/:TRIGger:TV:SOURce? /*The query returns CHANnel1*/
4.9.2 TRIGger:TV: POLarity
Command:TRIGger:TV: POLarity <polarity>:TRIGger:TV: POLarity?
DescriptionSelect or query the video polarity when the video is triggered.
Parameters:<polarity> ::= < POSItive | NEGAtive>
StatePOSItive: Positive video triggerNEGAtive: negative video trigger
ReturnThe query returns POSItive, NEGAtive.
Example:TRIGger:TV: POLarity POSItive /*Set the video polarity to positive polarity*/:TRIGger:TV: POLarity? /*Query returns POSItive*/
Edited by WisdomAugust at 2021-11-2 10:10
4.9.3 TRIGger:TV: MODE
Command:TRIGger:TV:MODE <mode>:TRIGger:TV:MODE?
DescriptionSet or query the synchronization type when the video is triggered.
Parameters:<mode> ::= < ALINes|LINEs|FIEld1|FIEld2|AFIelds>
StateALINes: trigger on all horizontal sync pulses.LINEs: For NTSC and PAL / SECAM video standards, trigger on a specified line in the odd or even field.FIDld1: Trigger on the rising edge of the first sawtooth wave in the odd field.FIDld2: Trigger on the first rising edge of the sawtooth wave in the even field.
ReturnThe query retuns ALINes, LINEs, FIEld1, FIEld2, AFlelds
Example:TRIGger:TV:MODE FIEld1 /*Set the synchronization type to an odd field*/:TRIGger:TV:MODE? /* The query returns FIEld1*/
4.9.4 TRIGger:TV:LINE
Command:TRIGger:TV: LINE <line>:TRIGger:TV: LINE?
DescriptionSets or queries the line number when the synchronization type is the specified line when the video is triggered.
Parameters:<line> ::= the line number of the specified line
State?NTSC:1-525?PAL/SECAM:1-625
ReturnThe query returns an integer.
Example:TRIGger:TV: LINE 100 /*Set the line number to 100*/:TRIGger:TV: LINE? /*The query returns 100*/
Edited by WisdomAugust at 2021-11-5 08:21
4.10 TRIGger:TIMeout
Command Listl TRIGger:TIMeout:SOURcel TRIGger:TIMeout: LEVell TRIGger:TIMeout:WIDthl TRIGger:TIMeout: POLarity