DSO5102P stuck on start up showing logo
I have DSO5102P with serial number T 1G/138 053564 . Its not quite two years oldand only done a handfull of hours use and I last used it about 3 months ago. When I powered it on yesterday on it did not boot. It hangs on startup screen with various buttons lit.The recovery menus says that the system was niot shutdown properly, which is not the case as I leave it pluged in on my bench power on, off on the buttton on the front panel. In the UK we have very good mains power, no spikes, brownouts etc., so i think this just means that the root FS is corrupted.
I tried recovery menu but it didn't help.F2 option reports Operation Failed. F3 option with latest firmware which Idownloaded from Hantek website also
fails. I use an 8GB usb stick formatted FAT32, either as a singel partition or on a single 2GB partition.
A link to a video of bootup
Boot Video
https://share.icloud.com/photos/071cDa5KOOY9D5Uz0IVVqcZyA
Iwould appreciate any advice.
Martin How
Folks, just after i posted this is spotted a fix (just put up) for an identical scope and issue. So problem solved
What was your fix?
Pages:
[1]