WisdomAugust Publish time 2022-12-3 07:59:58

Measure the Length of Cable by an Oscilloscope

PurposeUse an oscilloscope to measure the length of wire. PrincipleTime-domain reflectometer (TDR) is an electronic instrument that measures the wire by observing the reflected waveform in the cable. One use of the time-domain reflectometer is that it can measure the length of a cable (like twisted pair cable and coaxial cable). The time-domain reflectometer looks like this


WisdomAugust Publish time 2022-12-5 08:52:41

We can use a pulse generator and an oscilloscope to make a set of economic time-domain reflectometer instruments to measure the length ofthe cable. The principle of using TDR to measure the cable length.


WisdomAugust Publish time 2022-12-7 08:00:35

Transmit a high-speed edge pulse signal to one end of an unknown length cable. The signal will propagate along the cable to the other end. If the other end of the cable is disconnected, the signal will reflect back to the starting point after reaching the end point. Use an oscilloscope to measure the time difference between signal transmission and reflection, you can calculate the length of the cable. The wire or cable only transmits energy, and the wire itself does not consume energy or almost does not lose energy. When the radio-frequency signal reaches the end of the cable, there is no way to release the energy, and it will propagate back along the cable. Just like us yelling at the wall, the sound hits the wall and returns back to produce an echo.

WisdomAugust Publish time 2023-1-3 13:11:24

The formula for calculating cable length is as follows

Length calculation formula
L = cable length, unit: meter. Δt = the time difference between signal transmission and reflection, unit: second. C = speed of light, unit: meters per second. VF = cable speed factor, constant, no unit.

WisdomAugust Publish time 2023-1-4 08:41:19

The speed of the electrical signal in the cable cannot reach the theoretical speed of light. The ratio of the speed of light to the actual speed of the electrical signal in the cable is called the velocity factor or velocity of propagation). Abbreviation: VF or VOP. For coaxial cables, the speed factor (VF) of the coaxial cable varies with different dielectric materials

WisdomAugust Publish time 2023-1-5 14:36:52



WisdomAugust Publish time 2023-1-6 13:04:39



WisdomAugust Publish time 2023-1-10 13:44:42

Experiment Equipment l Fast edge pulse generator small boardl One oscilloscope supporting 10 nanoseconds or smaller time basel 5V DC power supplyl To be tested cable l BNC adapter

WisdomAugust Publish time 2023-1-11 16:27:28


                              TDR Pulse Generator

WisdomAugust Publish time 2023-1-12 08:18:56



BNC Tee Adapter ( one male to two female)


BNC Adapter (male to male)

Pages: [1] 2 3
View full version: Measure the Length of Cable by an Oscilloscope