Bart Publish time 2023-10-6 02:07:14

HDP180V8S Voltage display drops to 0

Edited by Bart at 2023-10-6 21:13

I had issue with voltage on my HDP180V8S. For example, if following settings are set:

Voltage and current settings = 20.00V 3.200A
under load, after pressing On/Off button, the voltage display drops to = 0V. the current shows 3.2A. and the power supply is not working.
I decided to pull out the PCB with display from the power supply. It seems that the element (I pressume it is diode) between "+" and "-" got fried. Do you know exactly what kind of element is it and its denomination?












Bart Publish time 2023-10-7 02:59:57

Hello, can anyone from Hantek reply on this thread, or is this forum dead?
Pages: [1]
View full version: HDP180V8S Voltage display drops to 0