chemistry78 Publish time 2017-5-4 20:40:01

DSO5102P Firmware update problem

hello,


i want to update my Hantek DSO5102P. i bought it yesterday.


i used orginal firmware from hantek download. (http://www.hantek.com/en/ProductDetail_3_26.html)


-> filename:dso5kp_func_dso5102p20170318.up


But i always get an error 0xfe.


system infos
Modell:            DSO5102P
SW-Version:       3.40.0(161227.0)
HW-Version:       1010xffff8108


please help. kind regards

amy Publish time 2017-5-5 09:40:47

Please check the format of your USB stick. It must be FAT32 format.

chemistry78 Publish time 2017-5-5 15:22:41

Edited by chemistry78 at 2017-5-5 16:09

hello, it's FAT32 formated and recognized by the Hantek. Any ideas? i used many other usb sticks (2.0 and 3.0).


wrong file?




After click F5, it shows 0/10 and i get the error message. system info shows =0
saving wave to usb stick is working, see here:






amy Publish time 2017-5-5 16:07:03

chemistry78 replied at 2017-5-5 15:22
hello, it's FAT32 formated and recognized by the Hantek. Any ideas? i used many other usb sticks (2. ...

Please refer to the document to partition USB stick.


chemistry78 Publish time 2017-5-5 16:30:44

Hmmm, really strange. i used disk Genius.
And it worked.
Now i have sw: 3.40.0(170318.0)
:-)
Many thanks!!!!!!!

QMESAR Publish time 2021-5-28 01:00:52

Hi HANTEK TEAM

I down loaded the Firmware 20210225 from the download page for my DSO5102P, I could not update the scope it reported the same issue as explained here in this post ,always reporting Firmware update failed error 0xfe
I then Formatted my USB stick to FAT32 and tried again that did not help then I followed the document to use disk Genius to set the sector , I then tried again but still the same Error.

Please HANTEK how can I update my Scope ,I have tried both solutions as you advised in this post. I am still not able to update .my current version is 3.40

Thanks you for your assistance

amy Publish time 2021-6-10 09:39:10

Edited by amy at 2021-6-10 09:40

What is the current firmware version number of your oscilloscope?

Please confirm the following points.
Whether the update file is in the root of USB stick.
Whether the USB stick can be identified on the oscilloscope.
Whether the waveform file can be saved to USB stick.
Whether the update file is damaged.
Whether the update file name or suffix has been changed.Whether the storage space of USB stick is less than 32G.

Here is another solution that customers share. You can also try it.
https://www.eediscuss.com/forum. ... ad&tid=14945&extra=


QMESAR Publish time 2021-6-10 14:49:53

Hi Amy,
Thank you I used Rufus as indicated here
https://www.eediscuss.com/forum.php?mod=viewthread&tid=14945&extra=
It all worked out well now :D:D
Thank you so much

ramazzot2009@ho Publish time 2023-2-28 02:54:02

chemistry78 replied at 2017-5-5 16:30
Hmmm, really strange. i used disk Genius.
And it worked.
Now i have sw: 3.40.0(170318.0)


Good afternoon.
My friend is having the same problem.
Please how did you solve it?
thank you very much
I am unable to update my Oscilloscope Firmware DSO5102P. When I try to update, this message appears on the Display: Firmware Update Failed, error 0xfe An update file was not found on the USB device
I download it in WinRar and unzip it but the Oscilloscope shows that there is no file. I am sending pictures of the Display. How to solve it?
My equipment: Oscilloscope HANTEK DSO5102P
Thank you for your attention and solution to the problem.

Translated by Google Translate

ramazzot2009@ho Publish time 2023-6-22 21:42:37

Eu usei o Rufus ,formatei meu Pendriver com o este Software (Rufus).
Funcionou muito bem.
Pages: [1]
View full version: DSO5102P Firmware update problem