chaos Publish time 2017-10-1 01:45:30

DSO5102B and new firmware

Hello!
Can I flash to the latest version of DSO5102B? Any new firmware is not visible.

Rainerlan Publish time 2020-4-13 03:58:31

Hi,
I tried to update my DSO5102B from firmware 2.06.3 (130114.0) to dso5kb_func_dso5102b20180226.up
Unfortunately the scope returns the error 0xfe: No upgrade files detected on USB device.
Any thoughts?
The file is on the USB-drive.
I fried both, FAT32 file system & ExtFAT; I always get Error 0xfe.
Please help;)

wangshuang Publish time 2020-4-13 10:35:31




Please download FW from Hantek official page:
http://hantek.com/en/ProductDetail_3_26.html

wangshuang Publish time 2020-4-13 10:37:05

Rainerlan replied at 2020-4-13 03:58
Hi,
I tried to update my DSO5102B from firmware 2.06.3 (130114.0) to dso5kb_func_dso5102b20180226.up ...

I have emailed you, please check email.

Moreira-Br Publish time 2021-10-15 02:49:06

Edited by Moreira-Br at 2021-10-16 22:51

Hi,
I have an DSO5102B and i tried to update with dso5kb_func_dso5102b20190830.up in Hantek website.
This return the error 0xfe: No upgrade files detected on USB device.

SW: 2.06.3 (130114.0)
HW: 10070x555583e9

It seems that the website version is not compatible with my DSO.
Are there any updated firmware versions that are compatible with my DSO?


amy Publish time 2021-10-25 16:59:31

Moreira-Br replied at 2021-10-15 02:49
Hi,
I have an DSO5102B and i tried to update with dso5kb_func_dso5102b20190830.up in Hantek website ...

Please refer to this post.

https://www.eediscuss.com/forum.php?mod=viewthread&tid=14805&extra=&page=1

Because the oscilloscope is too old, there is no guarantee that the oscilloscope can start normally after the upgrade.
Pages: [1]
View full version: DSO5102B and new firmware