foxter-x Publish time 2017-11-6 18:39:39

DSO-5102B dump NAND-flash

Hi. I have a oscilloscope DSO-5102B (T1G/012 024865). 2 months ago it started to reboot. And a month ago does not turn on (black screen). Died NAND-flash (the programmer found the faulty blocks). Please send a dump of the NAND-flash for DSO-5102B. Thank you!

amy Publish time 2017-11-7 15:48:59




Sir, please send a message to me caiyijun@hantek.com

foxter-x Publish time 2017-11-7 16:01:48

Hello, amy. Excuse me for my English. Please help to restore the oscilloscope DSO-5102B. 2 months ago the oscilloscope began to reboot. A month ago, does not turn on (black screen). Measured all voltages on the power supply and the motherboard, everything is normal. Putty via UART displays "OMOMOMOM...." endlessly. Assembled programmer HJTAG and read dump from NAND-flash Samsung K9F1G08U0E. The programmer in the end has written that ">64 blocks (or pages do not remember exactly) is faulty". NAND-flash replaced. Please send dump for my oscilloscope. Read dump https://filecloud.me/yx0yo579qzn7.html . Thank you very much!

amy Publish time 2017-11-9 09:10:27

foxter-x replied at 2017-11-7 16:01
Hello, amy. Excuse me for my English. Please help to restore the oscilloscope DSO-5102B. 2 months ag ...

Sir, we have replied you via email.

foxter-x Publish time 2017-11-10 01:25:13

Edited by foxter-x at 2017-11-10 01:34

Amy, thank you for your help. Uboot flashed. It did not help. The problem is in hardware it seems. Tell me what else I can do?

amy Publish time 2017-11-10 15:41:59

It should be the hardware fault.
Please contact your seller to repair.

foxter-x Publish time 2017-11-10 18:29:54

Thanks for the help . I will contact the seller.

Rogerm Publish time 2017-11-11 09:07:30

Edited by Rogerm at 2017-11-12 10:14

Hello:
It has happened to me more or less the same as foxter-x my serial number is also> 20000, it is the same oscilloscope.
I need someone to pass me the nand flash backup.
I have already changed the flash for a new one but I do not have the software.

If you can not find it to buy it, playstation 3
carries two k9F1G08U0b
Forgive my English.
Thank you very much.
marcudios@yahoo.es






foxter-x Publish time 2022-1-3 17:02:49

I forgot to write about the solution. After replacing the RAM, the oscilloscope started working.

RRoman Publish time 2022-8-31 21:45:52

Hi!
I have almost same problem as other gyes. Can I also have a NAND dump for DSO5202B? Wrote a message to caiyijun@hantek.com
Pages: [1]
View full version: DSO-5102B dump NAND-flash