Title: DSO 5102P problems with both channel [Print this page] Author: NightStranger Time: 2017-3-5 21:36 Title: DSO 5102P problems with both channel Edited by NightStranger at 2017-3-5 21:38
I recently purchased an DSO5202P oscilloscope.
After some use here are artifacts began to appear.
Sorry my English is bad.
Author: amy Time: 2017-3-6 10:27
Sir, could you solder? Author: NightStranger Time: 2017-3-6 12:26
Yes. I have soldering and rework station. Author: amy Time: 2017-3-6 14:46
Please check whether there is pin continuous welding on the four chips.
[attach]1406[/attach]
[attach]1407[/attach]
If not, please replace them. The model is AD9288BSTZRL-40.
Author: NightStranger Time: 2017-3-6 15:55
Is there a difference, if I put AD9288BSTZ-40 or AD9288BSTZ-100 Author: NightStranger Time: 2017-3-6 17:29
How to reduce the noise at the input of the oscilloscope. What needs replacing? Author: amy Time: 2017-3-10 11:04
Replace the four chips(AD9288BSTZ-40) in the above picture. Also you can use AD9288BSTZ-100 to replace.
Welcome to Electronic Engineer Discuss (https://eediscuss.com/)