MPO6002EDU Series Oscilloscope Guide

WisdomAugust

Trig Menu Key -> Type -> Slope -> Source Softkey help information

Set slope trigger source to any analog channels by pressing this softkey.

Trig Menu Key -> Type -> Slope -> Slope Softkey help information

Press this softkey to set the trigger slope to rising or falling.

Trig Menu Key -> Type -> Slope -> Level Softkey help information

Press this softkey to select the trigger level: L1, L2, or both of them. Then, turn the V0 knob to adjust.

WisdomAugust

Trig Menu Key -> Type -> Video -> Sync Softkey help information

Press this softkey to select the fields and lines to trigger on.

Trig Menu Key -> Type -> Video -> Line No. Softkey help information

Press this softkey and turn the V0 knob to adjust the line number in the field to trigger on. The maximum line

number you can set depends on the selected TV standard and interlace factor.

Trig Menu Key -> Type -> Video -> Polarity Softkey help information

The Polarity softkey toggles the video trigger between positive sync polarity and negative sync polarity.

WisdomAugust

Trig Menu Key -> Type -> Pulse -> Width Softkey help information

Press this softkey and rotate the V0 knob to adjust the pulse width within the range of 20ns - 10s.

Trig Menu Key -> Type -> Video -> Source Softkey help information

This softkey sets the video trigger source to any analog channel input.

Trig Menu Key -> Type -> Video -> Standard Softkey help information

Select the video standard.

* Broadcast standards

- PAL

- NTSC

* Enhanced-definition and high-definition TV standards

-HDTV720p

-HDTV1080p

-HDTV1080i

WisdomAugust

Trig Menu Key -> Type -> Pulse -> Polarity Softkey help information

Press this softkey to set the pulse polarity to positive or negative.

The current trigger level is lower than a positive pulse and higher than a negative pulse.

Trig Menu Key -> Type -> Pulse -> When Softkey help information

Press this softkey to set the trigger condition as:

* = When the pulse width is equal to the specified time, the scope generates a trigger.

* ≠ When the pulse width is not the same as the specified time, the scope causes a trigger.

* > When a pulse width is greater than the specified time, the scope generates a trigger.

* < When a pulse width is less than the specified time, the scope causes a trigger.

WisdomAugust

Trig Menu Key help information

Use the Trigger Menu to set up the trigger type (or serial decode type) and trigger settings for the selected,

to choose trigger mode, and to set the holdoff.

Trig Menu Key -> Type Softkey help information

Select the trigger type: Edge, Pulse, Video, Slope, Timeout, Window, Pattern, Interval, Runt, Delay, Setup/Hold.

And set the decode mode: UART, LIN, CAN, SPI, IIC.

Trig Menu Key -> Type -> Edge -> Source Softkey help information

Press this softkey to select edge trigger source from analog or digital channels.

Trig Menu Key -> Type -> Edge -> Slope Softkey help information

Set the trigger slope for the selected trigger source as rising, falling, or either.

Trig Menu Key -> Type -> Pulse -> Source Softkey help information

Select pulse width trigger source from analog or digital channels by pressing this softkey.

WisdomAugust

Display Key -> Persist Softkey help information

Press this softkey and use the V0 knob to set the waveform persistence options.

* Off - turn persistence off. No persistence data remain on the screen.

* Infinite - display all previously acquired points until persistence is turned off.

* 1s, 5s, 10s, 30s - remain the previous acquisitions on the display for a specified amount of time.

Display Key -> Color-Grade Softkey help information

Turn on or off the thermal color display.

Display Key -> Menu Timeout Softkey help information

Turn on or off the Menu Timeout function.

When On, the softkeys menu will be hidden automatically in few seconds if no switching operation on the

oscilloscope.

When Off, the softkeys menu displays all the time.

WisdomAugust

Display Key -> Type Softkey help information

Press this softkey to toggle the display type between Vectors and Dots.

* Vectors - fills the space between adjacent sample points in the display.

* Dots - displays sample points directly.

Display Key -> Intensity Softkey help information

Press this softkey and rotate the V0 knob to adjust the intensity of the waveform display.

Display Key -> Grid Softkey help information

This softkey changes the grid type to solid grid, dotted grid, or non- graticule.

Display Key -> Graticule Softkey help information

Press this softkey and turn the V0 knob to adjust the intensity of the display grid.

Display Key -> Brightness Softkey help information

Press this softkey and turn the V0 knob to adjust the brightness of the display.

WisdomAugust

Save/Recall Key -> Recall -> Recall From -> External -> Press To Recall Softkey help information

When external selected and a USB storage device connected, press this softkey to open File list and select

the waveform data file to recall.

Save/Recall Key -> Recall -> Recall From -> External -> Press To Recall -> Return Softkey help information

Press this softkey to return to the previous menu.

Save/Recall Key -> Recall -> Return Softkey help information

Press this softkey to return to the previous menu.

Display Key help information

When press and immediately release the Display key to open the Display Menu, you can:

*Set persistence.

*Turn on or off the color grade.

*Select the waveform display type.

*Set waveform intensity, grid type and intensity, and screen brightness.

Press and hold the Display key to clear persistence, or to clear the statistic measurements, then, to reacquire or recount.

WisdomAugust

Save/Recall Key -> Recall -> Type Ref -> Close Softkey help information

Press this softkey to close the recalled reference waveform on the display.

Save/Recall Key -> Recall -> Recall From Softkey help information

Toggle between internal and external to recall the file.

Save/Recall Key -> Recall -> SetUp/Waveform/Ref Location Softkey help information

Select an oscilloscope's internal storage location from where you want to call back the saved file.

Save/Recall Key -> Recall -> Press To Recall Softeky help information

To recall a setup, wave, or reference waveform from internal memory or USB storage device.

WisdomAugust

Save/Recall Key -> Save -> Press To Save -> Save Softkey help information

To save a new csv format file with the default file name on the USB storage device.

Save/Recall Key -> Save -> Press To Save -> Return Softkey help information

Press this softkey to return to the previous menu.

Save/Recall Key -> Save -> Return Softkey help information

Press this softkey to return to the previous menu.

Save/Recall Key -> Recall Softkey help information

Press this softkey to display the Recall Menu.

Save/Recall Key -> Recall -> Type Softkey help information

Select the type (Setup, Waveform, Reference Waveform, and CSV) of data you want to recall.