Edited by WisdomAugust at 2019-7-11 08:04
1 Select the function and amplitude of the burst. For burst waveforms, you can select sine, square, ramp, pulse, or arbitrary waveforms (noise is allowed only in the “gated” burst mode and dc is not allowed). For this example, select a sine wave with an amplitude of 200mV.
2 Select the burst mode.
Press and then verify that the “N Cycle” (internally-triggered) mode is currently selected.file:///C:\Users\ADMINI~1\AppData\Local\Temp\ksohtml5012\wps1.jpg
|