|
Two bugs are revealed, which are manifested when setting the scan time 80 sec / div:
1) On the screen, the oscillogram runs too fast and passes one division in 13 seconds instead of 80 seconds;
2) Неверная информация в окне "Sys Status":
In this window it is said that all 4000 samples stored in memory are displayed on the screen. However, this can not be due to the fact that a period of about 26.6 minutes (20 divisions of 80 seconds each) is placed on the screen, and 33.3 minutes (4K * 0.5 (2 samples per second)) in the memory.
P.S: Sorry my bad english.
|
|