Electronic Engineer Discuss

Title: Hantek2D72/2D42/2C72/2C42 FPGA update [Print this page]

Author: amy Time: 2018-12-4 14:46
Title: Hantek2D72/2D42/2C72/2C42 FPGA update
Edited by amy at 2019-10-16 16:22

Hantek2D72/2D42/2C72/2C42 FPGA update
1. Download the latest software and FPGA software in the following link:
http://hantek.com/en/ProductDetail_1_13174.html
2. Refer to the document to install the software.[attach]2383[/attach]
3. Double click Hantek2xx2 icon on desktop, and successful connection with oscilloscope(The bottom left corner of the software shows "Connected").
4. Ctrl+Alt+Shift+F keyboard keys are pressed at the same time, enter the FPGA update window, as following picture.

5. Click

, and select the downloaded FPGA software, Click “Update”.
6. After the update is completed, restart the oscilloscope.

[attach]2471[/attach]

[attach]2890[/attach]

Author: pmaggi Time: 2018-12-5 05:11
Where can I find the change log for this upgrade?

Author: ivesh Time: 2019-7-30 13:23
Hello is the downloaded DS1302_2019033004.bin FPGA version the V04 version ?

Author: amy Time: 2019-8-1 08:38

ivesh replied at 2019-7-30 13:23
Hello is the downloaded DS1302_2019033004.bin FPGA version the V04 version ?

Sir, yes, the version is V04.

Author: ChuckAllison Time: 2019-9-6 04:12
Problem running the fpga update.. I am using windows 10 1903 32 bit. When I press the key combination above in the instructions nothing happens inside the software. I followed the above instructions to the letter. Is this a problem with windows 10?

Thanks,

Chuck Allison

Author: amy Time: 2019-9-6 15:37
Please use the Checkupdate to update directly.
[attach]3136[/attach]

[attach]3137[/attach]

Author: ConstantinNosov Time: 2019-10-12 16:28

amy replied at 2019-9-6 15:37
Please use the Checkupdate to update directly.

В прямом обновлении старая версия программы, пожалуйста добавьте последние версии.

Author: darka7 Time: 2020-2-7 04:46
Edited by darka7 at 2020-2-7 15:51

Deleted...

Author: pusiya Time: 2020-2-12 03:42
Может кто-нибудь выложить FPGA V5 ?

Author: Alexei Time: 2020-3-7 03:18
Блин, включил этот автоапдейт и оно мне залило 04 версия FPGA, а была 05, ....какого хера?? че за дела вообще такие? Где взять обратно 05 версию? ...на оф сайте походу 04 только висит

Author: Sobakin76 Time: 2020-3-11 03:37
Please upload FPGA V05. Just made autoupdate with forced update and downgraded FPGA V05 to V04

Author: amy Time: 2020-3-13 16:31
Please send a message to me caiyijun@hantek.com

Author: protek Time: 2020-3-31 16:20
Доброго здоровья! Так где же можно получить 5FPGA?

Author: Igor_kamensk Time: 2020-5-23 22:41
Good afternoon. Just purchased the device. I decided to make an update through the program and lowered the version of FPGA 7 to FPGA 4. Could you send the latest version to the mail or give a link from where it can be downloaded
Включил автообновление и сделал даунгрейд FPGA с 07 на 04. Откуда можно скачать FPGA 07, выложите пожалуйста или поделитесь ссылкой. Версия 2D72.

Author: Xakeron Time: 2020-5-30 11:56
Кому нужна FPGA V7 - забирайте.

Author: etkal Time: 2020-8-5 23:56

Windows 10 as of version 1903 intercepts Ctr-Alt-Shift-F so you will need to change this combination in your software.  I had to install on an older laptop that I had not yet upgraded in order to update the FPGS.

  Regards,
  Erik

Author: rayd123 Time: 2021-10-30 21:56
Edited by rayd123 at 2021-10-30 22:35

I have updated my 2D72 to the latest Firmware I could find (2020070701), my FPGA is at V02, I downloaded the latest version of the Hantek2xx2 software (DfuSeDemo).

I have a couple of questions, should I update the FPGA to v07 and if so what does it do?

Is there a later version of the Firmware/Software than what I got from the Hantek website?

Author: rayd123 Time: 2021-11-25 09:53
Edited by rayd123 at 2021-11-25 09:55

Amy / Hantek, Please can you reply, my 2D72 currently is on the latest firmware but on V02 of the FGPA, should I update the FGPA to V07 or should I stick with V02?

Also why isnt the FGPA update on the Downloads section of the Hantek support site why is it located on this forum?

Author: 小林 Time: 2021-11-25 23:06

rayd123 replied at 2021-11-25 09:53
Amy / Hantek, Please can you reply, my 2D72 currently is on the latest firmware but on V02 of the FG ...

It seems to solve just a few minor problems,but you can use the program's force update button to update it.

Author: BoMG Time: 2022-5-27 00:20
Do you have FPGA FW newer as V7?

Welcome to Electronic Engineer Discuss (https://eediscuss.com/)