Electronic Engineer Discuss

Title: IDSO 1070A signal distortion [Print this page]

Author: Jeffrey    Time: 2019-3-12 15:49
Title: IDSO 1070A signal distortion
Dear Hantek service,

I got a good tool(Oscilloscope) for cabling to wireless at begin.
But I have problem to test on my devices (Not each device has the symptom)
When I span signal the wave seems good, but if view overall signal then wave seems distortion.
Here is what I experiment as below

I checked two devices have similar period (1/4.8MHz).
According to Nyquist theorem if the signal without distortion the lowest sample rate must double real signal frequency.
Is it the software display problem?
Can I do anything improve it?
BTY, do we have higher sampling rate wireless oscilloscope?(One of my suspect is low sample rate)

Best wishes,
Jeffrey



Author: Jeffrey    Time: 2019-3-12 17:11
Photo link as below
https://screenshot.net/tw/dlkr7to

Author: amy    Time: 2019-3-28 11:48
Jeffrey replied at 2019-3-12 17:11
Photo link as below
https://screenshot.net/tw/dlkr7to

Sorry, I can't see what time base you set.
What is the current sampling rate displayed on the software?

Author: Viktoriya28    Time: 2023-4-4 00:10
Это так.


Author: janetgee    Time: 2024-1-15 22:40
The Student Portal is your primary information source. It serves as a conduit for communication between teachers and students and gives each student personalized access to all relevant study materials and information. The greatest learning portal available is provided by UNICCM.

Author: hermiane    Time: 2024-2-5 23:24
A well-maintained business facility is beneficial to clients and customers. The experience itself will drive customer trust and will then reflect on their daily dialogues, spreading positive news about the business. Achieving this is a critical role of facility management. UNICCM's online facilities management diploma courses will provide you with all the necessary knowledge you will need for the job. Check out all the other courses they provide, too.


Author: hermiane    Time: 2024-3-12 00:42
        In the construction sector, being given the title of manager is considered the top position. However, in order to become one, you must first become chartered. Following that, you can pursue membership or the MCIOB. This is a title that is only given to individuals who have demonstrated experience as a building site supervisor for at least 5 years. Chartered construction managers make tens of thousands of dollars per year and can earn substantially more in senior-level employment. List of mciob course can be found on the link.


Author: hermiane    Time: 2024-4-24 21:08
Online APC training may be the perfect platform for you to earn MRICS. MRICS is popular because this title is beneficial to your career; it provides better work opportunities, wide contacts to network with, and higher salaries. Get it here, apc pathway guide





Welcome to Electronic Engineer Discuss (https://eediscuss.com/) Powered by Discuz! X3.2