Title: i buy hantek 6022bl and need to sniff ide (pATA) password [Print this page] Author: okulski Time: 2019-10-11 21:04 Title: i buy hantek 6022bl and need to sniff ide (pATA) password i make connection betwen ide hard drive and host to data pins 0-8 pins and i dont know how use logic maulti function virtual signal analyzer?
Author: amy Time: 2019-10-16 13:59
You need to click the capture button to capture the data manually.
[attach]3193[/attach]
Author: okulski Time: 2019-10-16 20:31
after press i have 1second and no captured data! how i make capture with strobe signal? i have read signal, write signal and strobe signal. how i make capture spi, i2c, rs-232, i2s interfaces? Author: amy Time: 2019-10-21 15:21
Oscilloscope and logic analyzer cannot be used at the same time.
Is the oscilloscope part turned on when you click Capture?
If you want to do secondary development, please refer to the SDK solder in CD. Author: okulski Time: 2019-10-22 20:21
i use only logic analyzer at time. Author: okulski Time: 2019-10-22 20:26
analyzer not use strobe signal for record or write captured data record in internal(analyzer) memory and internal memory very small! Author: okulski Time: 2019-12-9 19:47
it is VERY VERY bad device as a logic analyzer!!!!! device not have software for use device! support very bad - cant answear! Author: amy Time: 2019-12-12 14:07
Sorry, this software may not meet your needs. Please send a message to my email caiyijun@hantek.com.
Welcome to Electronic Engineer Discuss (https://eediscuss.com/)