Title: new freamware and update for 4032L [Print this page] Author: Hesam1024 Time: 2019-11-13 07:40 Title: new freamware and update for 4032L Hi,
I've bought a 4032L and used it under Win8.1.
but the Hantek4032L software is very old (2013) and have very lag and crash when used at 400MHz and 64M buffer.
Have come a new update for this software ?
I used Salea Logic software before and it was really user-friendly.
Is it possible to connect 4032L to Salea Logic or any like software ?
The disadvantages I've seen in 4032L and need to be improved are as follows :
1- Using RLL encoding for increase log time .2- Smoothing the process of zooming and moving in the waveform .
3- add plug-in for CAN , Biss , Modbus , USB , HDMI , JTag .
4- Ability to connect to Salea Logic software or creat a software like it .
Author: wangshuang Time: 2019-11-13 09:10
Please download the latest software in Hantek website. http://www.hantek.com.cn/en/ProductDetail_16_14.html
thank you for your advice,we are not going to add the PLUG-IN you mentioned.
how we can add plug-in to the software? Author: Hesam1024 Time: 2019-11-13 12:20
the version of software in about menu is for date 2013. Author: Hesam1024 Time: 2019-11-14 19:31
the software are very slow when zoom in and the export data from SPI log isn't suitable. because i want the same numbers I see in the software.
for example showing 0x0b in the CSV file by 8 row that 3 if them is 1 and 5 of them is 0.
i need see 0x0b in one row.
please help me.
Your device has suitable hardware but its software support is poor and I regret it. Author: wangshuang Time: 2019-11-20 08:53
since you set a large sample depth,so it takes some time to capture this number of point.so whatever you set the timebase to,zoom in or off,it takes this long time.So you can set a slightly smaller storage depth and a faster sample rate,you can see the waveform soon finish its collection.when you zoom in or out,it is not that slow.you can view the prograss bar in left corner,showing the capture prograss.
CSV file saves all the single samples you set, it’s the operation on single sample.It can't display as you see on the software.This help person to analyze problems.
Welcome to Electronic Engineer Discuss (https://eediscuss.com/)