Title: 6254BD lost firmware showing up as wrong USB device [Print this page] Author: Codebest Time: 2020-2-13 13:27 Title: 6254BD lost firmware showing up as wrong USB device Hopefully someone has a way to restore the firmware in my 6254BD USB scope. It's showing up as USB\VID_04B4&PID_8613\6&143C7634&0&1 which is the Cypress chip inside the device and not the Hantek device. So it's lost it's firmware it appears. Working one day, gone the next. Hopefully it can be reflashed?
Thanks
Author: amy Time: 2020-2-14 15:49
Please refer to this.
[attach]3403[/attach]
Author: Codebest Time: 2020-2-15 01:54
Thank you, that solved my problem. Device is back up and running. Author: heathf Time: 2020-3-9 02:12
I had exactly the same problem and this solution fixed my 6254BD USB scope too.
The instructions neglect to mention that you must install the Cypress USB Driver before trying to use the Cypress USB console to reprogram the device. Author: wangshuang Time: 2020-3-9 15:45
This is not necessary, it is only an individual case.
Welcome to Electronic Engineer Discuss (https://eediscuss.com/)