Title: Hantek 6204BD does not work. [Print this page] Author: felishaus Time: 2020-5-21 05:06 Title: Hantek 6204BD does not work. Hello. I am having a problem with the Hantek 6204BD. When connected to a PC, it is defined in the device manager as Hantek 6000B but the software Hantek-6000 ver 2.2.5 does not see the oscilloscope (connection indicator is gray). On the oscilloscope panel, the red LED does not blink. I tried to connect on Windows 10 and Windows 7.
Author: wangshuang Time: 2020-5-21 11:54
When connected to PC, did you use all black and red USB cable? Does the 6000B in device manager has a yellow "!", you need to update a corresponding driver manually.
Download link: http://hantek.com/en/ProductDetail_2_10164.html
Author: felishaus Time: 2020-5-21 12:50
When connecting, I use 2 cables red and black. The device manager displays normally without a "!" I reinstalled the driver and software many times. Author: amy Time: 2020-5-25 14:11
Please connect a 5V@2A adapter to the red USB connector as auxiliary power supply.
Can solve your problem? Author: felishaus Time: 2020-5-28 22:15
I tried to connect with an additional power source (5v 2a) unfortunately it did not work.
Below are screenshots of the device manager software and front panel. Author: felishaus Time: 2020-5-29 18:17
Reload fffffffffggghhhhh Author: amy Time: 2020-6-5 11:49
Please refer to the attachment to update the FPGA to try.
[attach]3661[/attach]
Welcome to Electronic Engineer Discuss (https://eediscuss.com/)