Title: Error All functional value [Print this page] Author: Ryan Time: 2021-9-17 08:18 Title: Error All functional value
We have purchased a tool Hantek HT824 from China.
We have tested the tool, the result appears that the tool has an Error All functional value, for example
Function source V.
1.000 V = 0.937 V
5.000 V = 4.679 V
10.000 V = 9.365 V
20.000 V = 18.792 V
Function source mV. Error over accuracy
Function source ohm. Can't Generate
Function source mA. Can't Generate
Function source TC. Error over accuracy
Function source RTD. Can't Generate
We ask for advice on solving the problem.
Please get back to me as soon as possible.
Thankyou
Author: Ryan Time: 2021-9-17 08:34
（1）如果这台机器刚开始使用的时候是好的，不知道什么愿意突然变的不准确了，这的确是个大问题，需要花时间去确定这个问题。我一直使用的一台机器测试了DCV仍然非常准确。
（2）如果一开始使用就不准，怀疑未校准的可能性较大。需要重新校准，分析了DCV的数据，线性度还是很好的，校准下应该就没问题了。 Author: Ryan Time: 2021-9-17 08:56 https://e.hantek.com/video/210917.mp4
Welcome to Electronic Engineer Discuss (https://eediscuss.com/)