Electronic Engineer Discuss

Title: Trigger mode ALT [Print this page]

Author: radi_k Time: 2022-1-29 16:46
Title: Trigger mode ALT
I turned on mode 1. (see attachment)
what is 2.?
https://prnt.sc/26la3yi

Author: radi_k Time: 2022-1-29 17:00
Trigger mode ALT. Channels 3 and 4 OFF (1a or 1b see attachment). Why 2.?

Author: radi_k Time: 2022-1-29 17:07
I can't attach an image!!!

Author: radi_k Time: 2022-1-29 17:11
https://prnt.sc/26labqv

Author: radi_k Time: 2022-1-29 17:26
After turning on the oscilloscope, the trigger changes the value
1. Trigger level before shutdown
2. Trigger level after switching on

Author: radi_k Time: 2022-1-29 17:32
Oscilloscope software version

Author: radi_k Time: 2022-1-29 17:43
How to change channel color?

Author: radi_k Time: 2022-2-2 17:55
Can someone answer my questions?

Author: Jing Time: 2022-2-9 15:50

What is the model of your machine please?
The color of the channel cannot be changed.

Author: radi_k Time: 2022-2-10 02:33
Model Hantek 6074BC

Author: Jing Time: 2022-2-10 16:14

radi_k replied at 2022-1-29 17:00
Trigger mode ALT. Channels 3 and 4 OFF (1a or 1b see attachment). Why 2.?

When the channel is closed, the icon of the channel will also be displayed on the left.

Author: Jing Time: 2022-2-10 16:15

radi_k replied at 2022-1-29 17:26
After turning on the oscilloscope, the trigger changes the value
1. Trigger level before shutdown
2. ...

When the channel is closed, the icon of the channel will also be displayed on the left.

Author: Jing Time: 2022-2-11 10:12

The two brown trigger marks marked in the picture are useless, you only need to adjust the trigger mark of the corresponding channel.

Author: radi_k Time: 2022-2-12 23:50
Edited by radi_k at 2022-2-13 00:09

After turning on the oscilloscope, the trigger increases the value exactly 10 times. This must be corrected!

Author: radi_k Time: 2022-2-13 00:04
Edited by radi_k at 2022-2-13 00:08

Two brown marks (2) must be removed! They really bother me!

Author: radi_k Time: 2022-2-22 00:06
Will someone answer my requirements?

Author: Jing Time: 2022-2-24 13:40

radi_k replied at 2022-2-12 23:50
After turning on the oscilloscope, the trigger increases the value exactly 10 times. This must be co ...

Please describe more specifically, under what circumstances will the trigger value be increased tenfold?

Author: Jing Time: 2022-2-24 13:42

radi_k replied at 2022-2-13 00:04
Two brown marks (2) must be removed! They really bother me!

You can move this icon to the top to hide it, and if we upgrade the software, we will inform you in time.

Author: radi_k Time: 2022-2-27 17:15

Please describe more specifically, under what circumstances will the trigger value be increased tenfold?

If you exit the program and then turn on the program again, the label shows exactly 10 times more.

Author: Seo-Ul-Mok Time: 2024-3-28 20:30
Note: The author has been banned or deleted.

Welcome to Electronic Engineer Discuss (https://eediscuss.com/)