|
Hello grateful for your response. I understood what you wrote. I expressed myself wrong. What something that is before the old firmware when it appeared the peak-peak value was not correct. Ex. In the sinusoid at 60 Hz in 3 db, the maximum value is the RMS value x 1.4142. When I put the oscilloscope to measure the peak-to-peak value, love gave 2x, the peak went wrong. Then update the 2C42 firmware where MIN MAX is now, but it still shows the wrong values .. Leave two videos on google drive with one x10 tip and one with an x100 tip. Please see it. The value of the peak of runtime must be rms * 1.4142. The parameter for the result on the oscilloscope can not be obtained. Can you help me? Thank you very much.
|
|