Hantek2D72/2D42/2C72/2C42 FPGA update

amy · Post time 2018-12-4 14:46:45

Edited by amy at 2019-10-16 16:22

Hantek2D72/2D42/2C72/2C42 FPGA update
1. Download the latest software and FPGA software in the following link:
http://hantek.com/en/ProductDetail_1_13174.html
2. Refer to the document to install the software.
3. Double click Hantek2xx2 icon on desktop, and successful connection with oscilloscope(The bottom left corner of the software shows "Connected").
4. Ctrl+Alt+Shift+F keyboard keys are pressed at the same time, enter the FPGA update window, as following picture.

5. Click

, and select the downloaded FPGA software, Click “Update”.
6. After the update is completed, restart the oscilloscope.

Xakeron · Post time 2020-5-30 11:56:08

Кому нужна FPGA V7 - забирайте.

BoMG · Post time 2022-5-27 00:20:00

Do you have FPGA FW newer as V7?

小林 · Post time 2021-11-25 23:06:45

rayd123 replied at 2021-11-25 09:53
Amy / Hantek, Please can you reply, my 2D72 currently is on the latest firmware but on V02 of the FG ...

It seems to solve just a few minor problems,but you can use the program's force update button to update it.

rayd123 · Post time 2021-11-25 09:53:48

Edited by rayd123 at 2021-11-25 09:55

Amy / Hantek, Please can you reply, my 2D72 currently is on the latest firmware but on V02 of the FGPA, should I update the FGPA to V07 or should I stick with V02?

Also why isnt the FGPA update on the Downloads section of the Hantek support site why is it located on this forum?

rayd123 · Post time 2021-10-30 21:56:51

Edited by rayd123 at 2021-10-30 22:35

I have updated my 2D72 to the latest Firmware I could find (2020070701), my FPGA is at V02, I downloaded the latest version of the Hantek2xx2 software (DfuSeDemo).

I have a couple of questions, should I update the FPGA to v07 and if so what does it do?

Is there a later version of the Firmware/Software than what I got from the Hantek website?

etkal · Post time 2020-8-5 23:56:11

Windows 10 as of version 1903 intercepts Ctr-Alt-Shift-F so you will need to change this combination in your software.  I had to install on an older laptop that I had not yet upgraded in order to update the FPGS.

  Regards,
  Erik

Igor_kamensk · Post time 2020-5-23 22:41:19

Good afternoon. Just purchased the device. I decided to make an update through the program and lowered the version of FPGA 7 to FPGA 4. Could you send the latest version to the mail or give a link from where it can be downloaded
Включил автообновление и сделал даунгрейд FPGA с 07 на 04. Откуда можно скачать FPGA 07, выложите пожалуйста или поделитесь ссылкой. Версия 2D72.

protek · Post time 2020-3-31 16:20:35

Доброго здоровья! Так где же можно получить 5FPGA?

amy · Post time 2020-3-13 16:31:43

Please send a message to me caiyijun@hantek.com

Hantek2D72/2D42/2C72/2C42 FPGA update

This post contains more resources

Related collections:

This post contains more resources

Comments