Please select To the mobile version | Continue to access the desktop computer version

Electronic Engineer Discuss

1234Next
Return to list New
View: 38191|Reply: 35

2D42 Firmware update failed

[Copy link]

1

Threads

5

Posts

5

Credits

新手上路

Rank: 1

Credits
5
Post time 2019-3-5 22:51:09 | Show all posts |Read mode
Edited by Raduski007 at 2019-3-5 22:59

Hi, during the firmware update of 2D42 the process was termintated and the unit does not power on anymore. Please help!

Related collections:

Reply

Use magic Report

167

Threads

2070

Posts

2232

Credits

版主

Rank: 7Rank: 7Rank: 7

Credits
2232
Post time 2020-4-17 10:24:51 | Show all posts
USB-to-Serial adapter should be 3.3V.
If you use usb-c cable to connect the scope to computer, you don't need to connect VCC connector of USB-to-Serial adapter.

0

Threads

11

Posts

11

Credits

新手上路

Rank: 1

Credits
11
Post time 2019-3-6 01:41:29 | Show all posts
Hello. When flashing it is important to charge the batteries and use the laptop then there will be less problems. Try updating again by turning on boot mode by holding down the F1 key and pressing the power button. If it does not help, then just flashing through the programmer directly. I didn’t write in more detail because if not skillful actions can damage the device, it is used for programming STM ST-Link Utility

1

Threads

5

Posts

5

Credits

新手上路

Rank: 1

Credits
5
 Author| Post time 2019-3-6 02:02:51 | Show all posts
+79003631279 replied at 2019-3-6 01:41
Hello. When flashing it is important to charge the batteries and use the laptop then there will be l ...

Thank you for the message, could you please send info in regards to flashing through the programmer directly. It is my only choice since the F1/Power combination does not work. Also the PC does not recognize the device. Thank You!

167

Threads

2070

Posts

2232

Credits

版主

Rank: 7Rank: 7Rank: 7

Credits
2232
Post time 2019-3-6 15:09:11 | Show all posts



If you can use TTL serial port tool, please refer to the attachment to program arm1 and arm2:
https://fil.email/695SztWD

This link is valid for only seven days. Please download it as soon as possible.

1

Threads

5

Posts

5

Credits

新手上路

Rank: 1

Credits
5
 Author| Post time 2019-3-6 22:50:01 | Show all posts
Thank you very much! I followed your instructions precisely but unfortunately I cannot connect to the device. I used USB to TTL module with no luck.
Your help is much appreciated. Have a great day!

167

Threads

2070

Posts

2232

Credits

版主

Rank: 7Rank: 7Rank: 7

Credits
2232
Post time 2019-3-7 10:46:59 | Show all posts
What's wrong with the USB to TTL module?

1

Threads

5

Posts

5

Credits

新手上路

Rank: 1

Credits
5
 Author| Post time 2019-3-11 02:44:01 | Show all posts
I got all the connection right, but it cannot connect to device to flash it.

167

Threads

2070

Posts

2232

Credits

版主

Rank: 7Rank: 7Rank: 7

Credits
2232
Post time 2019-3-12 15:23:14 | Show all posts
Raduski007 replied at 2019-3-11 02:44
I got all the connection right, but it cannot connect to device to flash it.

Sir, sorry, I don't know how to help you.You can check this question online.

Did you connect RX and TX in reverse?

1

Threads

5

Posts

5

Credits

新手上路

Rank: 1

Credits
5
 Author| Post time 2019-3-13 07:43:42 | Show all posts
Up and running beautifully, you are a the best. RX/TX reverse
Many thanks!!!

0

Threads

6

Posts

6

Credits

新手上路

Rank: 1

Credits
6
Post time 2019-3-25 23:18:46 | Show all posts
Hello, during the firmware update 2D42 I had the same problem (the process was interrupted and the device is no longer turned on). F1 / Power combination does not work. Can you please tell me how to restore the device?
You have to log in before you can reply Login | Register

Points Rules

Dark room|Mobile|Archiver|Electronic Engineer Discuss

2024-3-29 22:17 GMT+8 , Processed in 0.245476 second(s), 25 queries .

Powered by Discuz! X3.2

© 2001-2013 Comsenz Inc.

Quick Reply To Top Return to the list