Please select To the mobile version | Continue to access the desktop computer version

Electronic Engineer Discuss

View: 11605|Reply: 7

2D72 Firmware update failed

[Copy link]

1

Threads

3

Posts

3

Credits

新手上路

Rank: 1

Credits
3
Post time 2019-5-22 17:48:26 | Show all posts |Read mode
Hi, during the firmware update of 2D72 the process was termintated and the unit does not power on anymore. Please help!
Flashing key POWER and all.



Related collections:

Reply

Use magic Report

10

Threads

171

Posts

171

Credits

注册会员

Rank: 2

Credits
171
Post time 2019-5-23 09:37:59 | Show all posts
Edited by OASJ2YSeeEhBQo1 at 2019-5-24 01:02

In the installation folder of the PC software (C:\Program Files (x86)\Hantek2xx2) there is a file named "rescure_en.txt" check it and see if it helps in your case.

1

Threads

3

Posts

3

Credits

新手上路

Rank: 1

Credits
3
 Author| Post time 2019-5-23 22:23:09 | Show all posts
Thanks all ok

0

Threads

3

Posts

3

Credits

新手上路

Rank: 1

Credits
3
Post time 2019-7-8 19:36:34 From the mobile phone | Show all posts
This did not work for me, still no power on. Please send link for arm2 or software to correct fault. Thanks

167

Threads

2071

Posts

2232

Credits

版主

Rank: 7Rank: 7Rank: 7

Credits
2232
Post time 2019-7-9 13:34:58 | Show all posts

0

Threads

3

Posts

3

Credits

新手上路

Rank: 1

Credits
3
Post time 2019-7-11 15:44:51 From the mobile phone | Show all posts
Yes thank you army but that procedure did not work. I have tried it several times and the unit will not turn on or allow Power + F1. What else can I try? What is arm2? Can I try that?

10

Threads

171

Posts

171

Credits

注册会员

Rank: 2

Credits
171
Post time 2019-7-12 00:26:56 | Show all posts
Have you installed the Dfuse driver first? https://www.st.com/en/development-tools/stsw-stm32080.html

Also check the eevblog forum thread about these devices, you can find some more help there.
https://www.eevblog.com/forum/te ... 2485455/#msg2485455

0

Threads

3

Posts

3

Credits

新手上路

Rank: 1

Credits
3
Post time 2019-7-14 08:21:26 From the mobile phone | Show all posts
Thanks Army. I saw a message there that said to hold down F1 and then plug into pc. When pc recognises the Hantek to lift finger off F1. It entered DFU mode and I managed to repair the firmware.
You have to log in before you can reply Login | Register

Points Rules

Dark room|Mobile|Archiver|Electronic Engineer Discuss

2024-3-29 01:54 GMT+8 , Processed in 0.176585 second(s), 23 queries .

Powered by Discuz! X3.2

© 2001-2013 Comsenz Inc.

Quick Reply To Top Return to the list