Please select To the mobile version | Continue to access the desktop computer version

Electronic Engineer Discuss

View: 9194|Reply: 5

Hantek 1008C

[Copy link]

1

Threads

3

Posts

3

Credits

新手上路

Rank: 1

Credits
3
Post time 2019-11-27 16:21:45 | Show all posts |Read mode
Hello. I'm having trouble with my Hantek 1008C. I instal the software it's ok and runs in English. But when I try to connect it to USB it does not show up. And yes I have tried a different cable. It seems that it does not get the drivers on windows 10. I force instaled them and then the PC crashes to the BLUE screen and restarts. Tried SAFE MODE Instal and then it goes in a BLUE screen loop until it gets on recovery mode. And yes the Driver signature enforcement is disabled and the safe boot is disabled in bios. WHAT TO DO !!!!!
Reply

Use magic Report

1

Threads

3

Posts

3

Credits

新手上路

Rank: 1

Credits
3
 Author| Post time 2019-11-27 16:27:43 | Show all posts
I'm currently running a WIN 10 PRO. The scope worked before I updated to WIN 10 pro. Can Win cause this issue ???

167

Threads

2070

Posts

2232

Credits

版主

Rank: 7Rank: 7Rank: 7

Credits
2232
Post time 2019-11-27 16:47:52 | Show all posts
When does the blue screen appear? As long as the oscilloscope is connected to the computer, will the computer be blue screen? Or after run the software?

10

Threads

171

Posts

171

Credits

注册会员

Rank: 2

Credits
171
Post time 2019-11-27 22:29:56 | Show all posts
Yet another 1008C connective problem... This is very common and I already contacted Hantek many times about this problem and after several tests I did I am almost sure it is a USB driver issue.

In another thread I explained step by step a procedure to remove and reinstall the drivers that I normally do and that works most of the time for me: https://www.eediscuss.com/forum. ... 2&fromuid=26055

I had one 1008C that would cause blue screen instantaneously on windows 10, following the steps above (make sure to remove all drivers from the system first and then manually install the latest Win 10 driver) I manage to partially fix it. If after that your scope keeps loosing connection with the pc, try to use a different USB port and finally test a different USB cable.

1

Threads

3

Posts

3

Credits

新手上路

Rank: 1

Credits
3
 Author| Post time 2019-11-30 06:32:12 | Show all posts
The win goes in blue screen after I have force instaled the USB drivers on safe mode. On normal mode, it does not want to even recognise the driver when I try to instal it goes to blue screen.

167

Threads

2070

Posts

2232

Credits

版主

Rank: 7Rank: 7Rank: 7

Credits
2232
Post time 2019-12-3 11:34:04 | Show all posts
Edga replied at 2019-11-30 06:32
The win goes in blue screen after I have force instaled the USB drivers on safe mode. On normal mode ...

Please use this driver to try.



This post contains more resources

You have to Login for download or view attachment(s). No Account? Register

x
You have to log in before you can reply Login | Register

Points Rules

Dark room|Mobile|Archiver|Electronic Engineer Discuss

2024-3-29 21:39 GMT+8 , Processed in 0.245257 second(s), 22 queries .

Powered by Discuz! X3.2

© 2001-2013 Comsenz Inc.

Quick Reply To Top Return to the list