Please select To the mobile version | Continue to access the desktop computer version

Electronic Engineer Discuss

View: 9302|Reply: 9

HT6254BC - short circuit

[Copy link]

1

Threads

6

Posts

6

Credits

新手上路

Rank: 1

Credits
6
Post time 2019-12-28 20:12:19 | Show all posts |Read mode
Hi.
Few months ago I bought Hantek 6254BC PC USB Oscilloscope, PCB DSO6XX4 V1.08, S/N:64C08762.
I accidentaly while measuring some power device haven't disconnected power supply from laptop.
USB Port was blown and HT6254BC damaged.
After measuring U907 had short circuit, U19 and U4 had no output voltage.
I replaced all 3 SIK sot23-5 converters, so after that +1,25V, +1,8V, +3,3V came back.
There's still some issue because after connecting device is not recognised.
I did some measurements:
Tp11 +4,830V; Tp5 +4,815V; Tp4 +4,633V; Tp10 -4,495V; Tp18 +1,579V; "+1,25V" +1,258V; "+1,8V" +1,802V; "+3,3V" +3,307V; "3V3" +3,307V; Tp14 +3,214V.
After connecting to USB diode D11 light for a while, diode J5 light red then very short green and then blinking red.
Please some advice about further examining and reapairing.


Reply

Use magic Report

60

Threads

443

Posts

443

Credits

版主

Rank: 7Rank: 7Rank: 7

Credits
443
Post time 2019-12-31 11:49:32 | Show all posts
Please change this chip to try: 68013A

This post contains more resources

You have to Login for download or view attachment(s). No Account? Register

x

1

Threads

6

Posts

6

Credits

新手上路

Rank: 1

Credits
6
 Author| Post time 2020-1-11 06:17:20 | Show all posts
I ordered this USB controller chip CY7C68013A and I wait for shipping. I'll write on board if it solved the issue with my oscilloscope.

1

Threads

6

Posts

6

Credits

新手上路

Rank: 1

Credits
6
 Author| Post time 2020-3-8 02:39:18 | Show all posts
Marcin replied at 2020-1-11 06:17
I ordered this USB controller chip CY7C68013A and I wait for shipping. I'll write on board if it sol ...

Hi. I replaced CY7C68013A. It didn't solve the problem. My USB Oscilloscpe still shows as unrecognized device. What to check then? Maybe I need to reflash XC6SLX16?

60

Threads

443

Posts

443

Credits

版主

Rank: 7Rank: 7Rank: 7

Credits
443
Post time 2020-3-9 16:08:19 | Show all posts
Please upload a image to see what it shows in the Device Manager?

1

Threads

6

Posts

6

Credits

新手上路

Rank: 1

Credits
6
 Author| Post time 2020-3-13 00:14:46 | Show all posts
wangshuang replied at 2020-3-9 16:08
Please upload a image to see what it shows in the Device Manager?

screenshot

This post contains more resources

You have to Login for download or view attachment(s). No Account? Register

x

60

Threads

443

Posts

443

Credits

版主

Rank: 7Rank: 7Rank: 7

Credits
443
Post time 2020-3-14 09:06:12 | Show all posts
Please update the driver by right click Unknown Device, attached latest driver in following link.
http://hantek.com/en/ProductDetail_2_9163.html

1

Threads

6

Posts

6

Credits

新手上路

Rank: 1

Credits
6
 Author| Post time 2020-3-14 20:43:03 | Show all posts
wangshuang replied at 2020-3-14 09:06
Please update the driver by right click Unknown Device, attached latest driver in following link.
ht ...

It's been already done. Before failure USB Oscilloscope worked fine. Now is not recognized by OS, it looks like there's no communication between CY7C68013A and XC6SLX16 or some memory failure.


This post contains more resources

You have to Login for download or view attachment(s). No Account? Register

x

60

Threads

443

Posts

443

Credits

版主

Rank: 7Rank: 7Rank: 7

Credits
443
Post time 2020-3-17 13:25:16 | Show all posts
Please refer to this forum to resolve it.
https://www.eediscuss.com/forum. ... p;highlight=unknown

1

Threads

6

Posts

6

Credits

新手上路

Rank: 1

Credits
6
 Author| Post time 2020-3-28 18:21:59 | Show all posts
Edited by Marcin at 2020-3-28 18:50

I reprogrammed my HT6254BC with firmware in link, then installed regular soft Hantek 6000 ver.2.2.5 with scope drivers. I had to resolder CY7C68013A one more time, now scope works, I'll check it. Thanks for help.




This post contains more resources

You have to Login for download or view attachment(s). No Account? Register

x
You have to log in before you can reply Login | Register

Points Rules

Dark room|Mobile|Archiver|Electronic Engineer Discuss

2024-3-28 18:33 GMT+8 , Processed in 0.169358 second(s), 22 queries .

Powered by Discuz! X3.2

© 2001-2013 Comsenz Inc.

Quick Reply To Top Return to the list