Please select To the mobile version | Continue to access the desktop computer version

Electronic Engineer Discuss

Author: WisdomAugust

How to do mainboard programming via USB?

[Copy link]

58

Threads

1253

Posts

1333

Credits

金牌会员

Rank: 6Rank: 6

Credits
1333
 Author| Post time 2020-5-15 08:23:24 | Show all posts
Double click H-JTAG icon on the desktop, select some information that appears.




Connect mainboard (J901) and computer by parallel port wire and parallel port pinboard.
Power on.







This post contains more resources

You have to Login for download or view attachment(s). No Account? Register

x

58

Threads

1253

Posts

1333

Credits

金牌会员

Rank: 6Rank: 6

Credits
1333
 Author| Post time 2020-5-19 08:11:10 | Show all posts
Select “Settings” from the menu bar.




Select USB/LPTSetting


This post contains more resources

You have to Login for download or view attachment(s). No Account? Register

x

58

Threads

1253

Posts

1333

Credits

金牌会员

Rank: 6Rank: 6

Credits
1333
 Author| Post time 2020-5-20 08:13:56 | Show all posts
Edited by WisdomAugust at 2020-5-21 08:35

Select LPT JTAG Setting.

According to your pinboard, select to directly click “OK” or select “User Defined”.
If select “User Defined”, please refer to the below configuration.



This post contains more resources

You have to Login for download or view attachment(s). No Account? Register

x

58

Threads

1253

Posts

1333

Credits

金牌会员

Rank: 6Rank: 6

Credits
1333
 Author| Post time 2020-5-21 08:37:00 | Show all posts
2.3.3 Program ***.bin
Connect mainboard (J901) and computer by parallel port wire and parallel port pinboard. Power on.




This post contains more resources

You have to Login for download or view attachment(s). No Account? Register

x

58

Threads

1253

Posts

1333

Credits

金牌会员

Rank: 6Rank: 6

Credits
1333
 Author| Post time 2020-5-22 09:45:53 | Show all posts
1. Open software hjtag, click the Magnifier in the software interface and detect the mainboard
2. After detection, the model of CPU would be shown as blue in the software interface.
3. Click the “F” icon in the software interface.

Click “Load”


This post contains more resources

You have to Login for download or view attachment(s). No Account? Register

x

58

Threads

1253

Posts

1333

Credits

金牌会员

Rank: 6Rank: 6

Credits
1333
 Author| Post time 2020-5-23 08:06:16 | Show all posts
Select the file 2416.hfc in the programming file.



Click “4 Programming” on the left side of the panel.



This post contains more resources

You have to Login for download or view attachment(s). No Account? Register

x

58

Threads

1253

Posts

1333

Credits

金牌会员

Rank: 6Rank: 6

Credits
1333
 Author| Post time 2020-6-1 08:35:00 | Show all posts
Click “Check”, the CPU and flash model of mainboard would be shown.

Click ellipsis button, select image “whu-boot_5102p3nand_64MB_TFT70_V1.1.bin” in the image
file corresponding with the mainboard.



This post contains more resources

You have to Login for download or view attachment(s). No Account? Register

x

58

Threads

1253

Posts

1333

Credits

金牌会员

Rank: 6Rank: 6

Credits
1333
 Author| Post time 2020-6-2 08:46:09 | Show all posts
Click “Program” until finishing programming.


The connection between the mainboard of parallel port and computer can be switched off only after
the finish of programming.


This post contains more resources

You have to Login for download or view attachment(s). No Account? Register

x

58

Threads

1253

Posts

1333

Credits

金牌会员

Rank: 6Rank: 6

Credits
1333
 Author| Post time 2020-6-3 08:09:47 | Show all posts
2.4 Install EmbedSkyDownLoadTool
Unzip EmbedSkyDownLoadTool_V1.0.rar file.

Double click the icon to install.
Click “Next”.
Select the path of file installation, click “next”.
Click “Install”.
Click “Finish”. If it warns that “.net4.0” is required to install at the beginning of the installation,
please unzip “dotNetFx40_Full_x86_x64.rar” in the programming folder. Double click and press enter key to install it.


This post contains more resources

You have to Login for download or view attachment(s). No Account? Register

x

58

Threads

1253

Posts

1333

Credits

金牌会员

Rank: 6Rank: 6

Credits
1333
 Author| Post time 2020-6-4 09:23:37 | Show all posts
2.5 Program others2.5.1 Connect
Connect the mainboard and computer by serial port wire. Open software SecureCRT. Connect the correct “com” port.
Connect the computer and mainboard by USB cable.



This post contains more resources

You have to Login for download or view attachment(s). No Account? Register

x
You have to log in before you can reply Login | Register

Points Rules

Dark room|Mobile|Archiver|Electronic Engineer Discuss

2024-3-29 03:19 GMT+8 , Processed in 0.184893 second(s), 19 queries .

Powered by Discuz! X3.2

© 2001-2013 Comsenz Inc.

Quick Reply To Top Return to the list