Please select To the mobile version | Continue to access the desktop computer version

Electronic Engineer Discuss

12Next
Return to list New
View: 12341|Reply: 12

Can the Hantek 6074BC support UART decoding ? If so How do I set it up?

[Copy link]

1

Threads

11

Posts

11

Credits

新手上路

Rank: 1

Credits
11
Post time 2020-5-14 10:07:11 | Show all posts |Read mode
Can the Hantek 6074BC support UART decoding ? If so How do I set it up?
The trigger options are available on the Right Hand Side trigger mode but not in the T trigger button on the short cut bar.

Is there a help screen or tutorial on how to set this up?

Many thanks

Reply

Use magic Report

1

Threads

11

Posts

11

Credits

新手上路

Rank: 1

Credits
11
 Author| Post time 2020-5-15 08:19:20 | Show all posts
I have had a play and been able to trigger off the Stop bit when selected as long at the trigger threshold is above the waveform and also the data field however it won't trigger off the input data field.. tried hex binary and decimal.. seems to be Hex 0-F as won't accept ascii values.. if I type "U" from the terminal n,8,1 115200 and put 55 in the data field it triggers on any value.. not just 55. I want to trigger on a data value and then scroll along the data steam to find any issue.

how do I successfully set the trigger data mask?

60

Threads

443

Posts

443

Credits

版主

Rank: 7Rank: 7Rank: 7

Credits
443
Post time 2020-5-15 14:35:33 | Show all posts
6074BC supports UARTdecoding, decoded data is displayed in hexadecimal.

1

Threads

11

Posts

11

Credits

新手上路

Rank: 1

Credits
11
 Author| Post time 2020-5-15 17:59:18 | Show all posts
Thank you for your response.. i have three questions,

1) Where is the decoded data displayed? I assume the Data field in the trigger box (blue star) is the trigger data mask?

2) What does Table do? (purple marker)

3) What does the Connect colours mean (Red marker).. mine flicks between, grey, orange... is that correct? The 6074BC has a green LED above the CH1 connector.


This post contains more resources

You have to Login for download or view attachment(s). No Account? Register

x

1

Threads

11

Posts

11

Credits

新手上路

Rank: 1

Credits
11
 Author| Post time 2020-5-20 04:39:07 | Show all posts
Does anyone know how to achieve the last screen on the Hantek 6074BC website http://hantek.com/en/ProductDetail_2_9163.html ?


This post contains more resources

You have to Login for download or view attachment(s). No Account? Register

x

60

Threads

443

Posts

443

Credits

版主

Rank: 7Rank: 7Rank: 7

Credits
443
Post time 2020-5-20 09:07:57 | Show all posts
KeenAmateur replied at 2020-5-15 17:59
Thank you for your response.. i have three questions,

1) Where is the decoded data displayed? I as ...

After setting the trigger parameters, the decoding is automatically displayed at the top.
Data(blue star) means trigger on the defined data bit, when you choose "Data" for trigger.
Click Table to view the data record, click again to exit the data record.

This post contains more resources

You have to Login for download or view attachment(s). No Account? Register

x

60

Threads

443

Posts

443

Credits

版主

Rank: 7Rank: 7Rank: 7

Credits
443
Post time 2020-5-20 10:40:48 | Show all posts
KeenAmateur replied at 2020-5-20 04:39
Does anyone know how to achieve the last screen on the Hantek 6074BC website http://hantek.com/en/Pr ...

Need to set the corresponding baud rate and trigger conditions.

This post contains more resources

You have to Login for download or view attachment(s). No Account? Register

x

1

Threads

11

Posts

11

Credits

新手上路

Rank: 1

Credits
11
 Author| Post time 2020-5-20 20:39:24 | Show all posts
I believe I am... I have duplicated the exact setup on the UART picture above and I don't get an automatic decode.. I have downloaded and re-installed the SW from the 6074BC download page on the website. No change. What version / source of software are you using for these screen examples? Where can I get it from? The version I have seems to be from 2016 there must be more up to date versions than that?

This post contains more resources

You have to Login for download or view attachment(s). No Account? Register

x

1

Threads

11

Posts

11

Credits

新手上路

Rank: 1

Credits
11
 Author| Post time 2020-5-20 21:05:56 | Show all posts
Two other areas of inconsistency...

1) The Connect indicator on the interface blinks Orange is that normal?
2) The drop down trigger screen does not have decode options like the side panel trigger screen?

This post contains more resources

You have to Login for download or view attachment(s). No Account? Register

x

1

Threads

11

Posts

11

Credits

新手上路

Rank: 1

Credits
11
 Author| Post time 2020-5-22 07:32:59 | Show all posts
Where can I download HT6000BX version 2.2.1 to try as that version seems to work from the screen shots posted above?
12Next
Return to list New
You have to log in before you can reply Login | Register

Points Rules

Dark room|Mobile|Archiver|Electronic Engineer Discuss

2024-3-28 18:55 GMT+8 , Processed in 0.177192 second(s), 22 queries .

Powered by Discuz! X3.2

© 2001-2013 Comsenz Inc.

Quick Reply To Top Return to the list