Hantek6000BC/BD/BE not recognized

amy · Post time 2022-11-8 09:32:52

Edited by amy at 2022-11-9 11:43

Hantek6000BC/BD/BE series include the following models:

Hantek6074BC/Hantek6104BC/Hantek6204BC/Hantek6254BC
Hantek6074BD/Hantek6104BD/Hantek6204BD/Hantek6254BD
Hantek6074BE/Hantek6104BE/Hantek6204BE/Hantek6254BE

After the device is used normally, the device name in the computer device manager changes to "CYPRESS FX2LP NO EEPROM" or "Hantek EZ-USB FX2LP No EEPROM", or the hardware ID is "USB\VID_04B4&PID_8613 ", please refer to the following attachment to program.

ercoupeflyer · Post time 2022-11-8 14:23:47

I installed the program provided and the driver provided. the computer now sees the device as Hantek EZ-USB FX2LP No EEPROM(3.4.7.000)

What do I do Now to reload the firmware?

ercoupeflyer · Post time 2022-11-8 14:25:05

Sorry I ran the program provided and it does see the device

rafaelholeva · Post time 2024-2-22 10:18:58

Updated firmware and FPGA for Hantek 6074BD USB Oscilloscope

Hello Hantek folks, I need the correct FPGA version for my Hantek 6074BD mather board.

Please help me with the correct Firmware and FPGA update for my Hantek 6074BD board. Below is the information on the plate to facilitate identification.

PCB: DSO6000BCD_V1.00
FPGA: LemonTree 2090

rafaelholeva · Post time 2024-2-29 05:47:16

Edited by rafaelholeva at 2024-2-29 21:20

Updated firmware and FPGA for Hantek 6074BD USB Oscilloscope

Hello Hantek folks, I need the correct FPGA version for my Hantek 6074BD mather board.

Please help me with the correct Firmware and FPGA update for my Hantek 6074BD board. Below is the information on the plate to facilitate identification.

PCB: DSO6000BCD_V1.00
FPGA: LemonTree 2090

Hantek6000BC/BD/BE not recognized

This post contains more resources