SDK request for Labview : CNTECH

CYH2018

I am an engineer at a company called CNTECH that manufactures/sells electrical testing machines in Korea.
While I was looking for an oscilloscope to apply to the tester under development, I purchased 1set of your company's Hantek6212BE through Alibaba and am currently developing the tester.
Instead of the S/W provided with the product, I plan to provide the optimal S/W to the user through the S/W applied with Labview. However, the SDK you provided does not work properly.
I would like to request data such as VI that can show the waveform.
If the development is successful, I expect at least 100sets per year. Please cooperate for successful development.
Thank you.

CYH2018

Dear Sir,

Greeting from Hantek.

Please send us screenshots or videos of your questions.

Have a nice day.

CNTECH

Dear Sir

Hello, I am sending you the requested data regarding Labview S/W for Hantek6212BE as attached. First of all, please understand that I am a beginner learning about Labview.
The procedure I proceeded after purchasing your company's product is as follows and is not being carried out normally.
1. Open Labview S/W on the enclosed CD
2. Find the dll file while running the PC and select the dll file inside the CD to open the file
3. After opening the file, the error list pops up when I press the run button (broken state).  
First of all, I would like to inquire about how to deal with the error list.
And if you look at the block diagram, S/W should read the data from the equipment (Hantek6212BE) and plot it on the waveform, but there is no related function to read and write the data.
I'd appreciate it if you could help me with this.
I don't know how to attach the screenshot file here in EEdiscuss. I sent it to "chenyuehong@hantek.com" through Gmail, so please refer to it.

Best regards