Hantek DSO4102C does not boot.

popov

Hello! My oscilloscope failed to boot with the following error message in the UART console:

1. Failed to execute /linuxrc. Attempting defaults...
   
2. Kernel panic - not syncing: No init found. Try passing init= option to kernel. See Linux Documentation/init.txt for guidance.

Copy the Code

I have tried to recover, but it did not help. The recovery script finished with error message int the UART console:

1. tar: invalid tar magic

Copy the Code

This happend after I inproperly pressed power button several times so it does not fixed and switched off immediately.
The boot and recovery logs are attached .The version printed on the PCB is DSO4000C V1.02 2015-03
Please, help me to recover my oscilloscope.

kevinmartin

The Hantek DSO4102C is a digital oscilloscope that is popular with hobbyists and professionals alike. However, there have been reports of DSO4102C not booting.

Professional Hair Consultant in Encinitas CA