Please select To the mobile version | Continue to access the desktop computer version

Electronic Engineer Discuss

View: 14707|Reply: 6

Hantek DSO5102P self calibration failure

[Copy link]

1

Threads

2

Posts

2

Credits

新手上路

Rank: 1

Credits
2
Post time 2017-5-2 02:24:59 | Show all posts |Read mode
Edited by HantekMaster at 2017-5-2 03:26

Hello there,

I bought a DSO5102P that came with firmware 3.40.0(161227.0) and tried to do a self calibration. I 've got the following error message at step 29/38: Self calibration failed, error: 0x10802

I upgraded the firmware to the latest version 3.40.0(170318.0) and getting the same error message.

HW version: 1010xffff8108

Any idea what the problem could be?

Thanks






Related collections:

Reply

Use magic Report

167

Threads

2071

Posts

2232

Credits

版主

Rank: 7Rank: 7Rank: 7

Credits
2232
Post time 2017-5-2 13:30:35 | Show all posts
Sir, please replace the two components in the following picture.
1:UD2-4.5NU-L7(relay)
2:74HC595PW(IC)

This post contains more resources

You have to Login for download or view attachment(s). No Account? Register

x

1

Threads

2

Posts

2

Credits

新手上路

Rank: 1

Credits
2
 Author| Post time 2017-5-3 01:28:50 | Show all posts
Thank you Amy for the fast response.

0

Threads

1

Posts

1

Credits

新手上路

Rank: 1

Credits
1
Post time 2017-8-24 12:23:17 | Show all posts
Hello, I updated my DSO5102P to firmware 3.40.0 (170714.0), now the self calibration show error 0x602. Could you tell me how to fix it?
My hardware version is 10000xffff8103
Thank you very much.

167

Threads

2071

Posts

2232

Credits

版主

Rank: 7Rank: 7Rank: 7

Credits
2232
Post time 2017-8-25 14:14:33 | Show all posts
Sir, please power on the oscilloscope and wait for 20 minutes until it has adequately warmed up. And do self calibration again.

0

Threads

1

Posts

1

Credits

新手上路

Rank: 1

Credits
1
Post time 2018-9-30 19:26:26 | Show all posts
Hello, I have MSO5202D, firmware 3.2.35 (151208.0), my hardware version is 1020x55778344. The self calibration show error  x502 . Could you help me how to fix it?
Thank you very much. Roman

0

Threads

6

Posts

6

Credits

新手上路

Rank: 1

Credits
6
Post time 2023-2-28 02:31:49 | Show all posts



Good afternoon.
I am unable to update my Oscilloscope Firmware DSO5102P. When I try to update, this message appears on the Display: Firmware Update Failed, error 0xfe An update file was not found on the USB device
I download it in WinRar and unzip it but the Oscilloscope shows that there is no file. I am sending pictures of the Display. How to solve it?
My equipment: Oscilloscope HANTEK DSO5102P
Thank you for your attention and solution to the problem.

Translated by Google Translate
You have to log in before you can reply Login | Register

Points Rules

Dark room|Mobile|Archiver|Electronic Engineer Discuss

2024-3-29 09:51 GMT+8 , Processed in 0.245354 second(s), 25 queries .

Powered by Discuz! X3.2

© 2001-2013 Comsenz Inc.

Quick Reply To Top Return to the list