Please select To the mobile version | Continue to access the desktop computer version

Electronic Engineer Discuss

View: 7148|Reply: 2

Hantek 6254BD background noise

[Copy link]

1

Threads

3

Posts

3

Credits

新手上路

Rank: 1

Credits
3
Post time 2018-6-11 02:13:38 | Show all posts |Read mode
Edited by wolferl at 2018-6-11 02:42

Received the  Hantek 6254BD two days ago.

Unfortunately the device is not useable at all. There is constant background noise on all channels
shown and can be measured. Does not matter if the input connector is completely open or directly
grounded with an BNC connector.


Did the self-calibration routine several times - no change.

open input, setting at 20mV shows 17.6mVolt background noise
open input, setting at 500mV shows 31.4mVolt background noise
open input, setting at 5V shows 314mVolt background noise

Connected the scope with the probe to the probe compensation connector,
(probe was set to 1:10) shows the noise in the squarewave too.

Is the unit faulty ?

picture: https://drive.google.com/open?id ... LazVVeZpdd6ZlZOIaqk





Reply

Use magic Report

2

Threads

14

Posts

14

Credits

新手上路

Rank: 1

Credits
14
Post time 2019-9-11 23:27:51 | Show all posts
Why Amy not replied in your case.

167

Threads

2071

Posts

2232

Credits

版主

Rank: 7Rank: 7Rank: 7

Credits
2232
Post time 2019-9-12 10:10:08 | Show all posts
That's normal. You can use the average acquire to reduce the noise.
Acquire -> Acquisition -> Average.
You have to log in before you can reply Login | Register

Points Rules

Dark room|Mobile|Archiver|Electronic Engineer Discuss

2024-3-29 07:13 GMT+8 , Processed in 0.164531 second(s), 21 queries .

Powered by Discuz! X3.2

© 2001-2013 Comsenz Inc.

Quick Reply To Top Return to the list