Trig Menu Key -> Type -> Pulse -> Width Softkey help informationPress this softkey and rotate the V0 knob to adjust the pulse width within the range of 20ns - 10s.
Trig Menu Key -> Type -> Video -> Source Softkey help informationThis softkey sets the video trigger source to any analog channel input.
Trig Menu Key -> Type -> Video -> Standard Softkey help informationSelect the video standard.* Broadcast standards- PAL- NTSC* Enhanced-definition and high-definition TV standards-HDTV720p-HDTV1080p-HDTV1080i
Trig Menu Key -> Type -> Video -> Sync Softkey help informationPress this softkey to select the fields and lines to trigger on.
Trig Menu Key -> Type -> Video -> Line No. Softkey help informationPress this softkey and turn the V0 knob to adjust the line number in the field to trigger on. The maximum line number you can set depends on the selected TV standard and interlace factor.
Trig Menu Key -> Type -> Video -> Polarity Softkey help informationThe Polarity softkey toggles the video trigger between positive sync polarity and negative sync polarity.
Trig Menu Key -> Type -> Slope -> Source Softkey help informationSet slope trigger source to any analog channels by pressing this softkey.
Trig Menu Key -> Type -> Slope -> Slope Softkey help informationPress this softkey to set the trigger slope to rising or falling.
Trig Menu Key -> Type -> Slope -> Level Softkey help informationPress this softkey to select the trigger level: L1, L2, or both of them. Then, turn the V0 knob to adjust.
Trig Menu Key -> Type -> Slope -> When Softkey help informationSet the scope to trigger on rising or falling slope condition that is:* equal to (=) the specified time.* not equal to (≠) the specified time.* greater than (>) the specified time.* less than (<) the specified time.
Trig Menu Key -> Type -> Slope -> Time Softkey help informationPress this softkey and rotate the V0 knob to adjust the slope time. Time setting range: 20ns - 10s.
Trig Menu Key -> Type -> Timeout -> Source Softkey help informationThis softkey sets the timeout trigger source to any analog or digital channel input.
Trig Menu Key -> Type -> Timeout -> Polarity Softkey help informationThis softkey selects positive or negative polarity.
Trig Menu Key -> Type -> Timeout -> Period Softkey help informationPress this softkey and turn the V0 knob to adjust the timeout period.
Trig Menu Key -> Type -> Window -> Source Softkey help informationPress this softkey to select window trigger source from analog channels.
Trig Menu Key -> Type -> Window -> Level Softkey help informationThis softkey lets you set a 'window' by adjusting voltage levels. Window trigger detects the moment when the waveform enters or leaves set window voltage range.
Trig Menu Key -> Type -> Pattern -> Source Softkey help informationThis softkey selects pattern trigger source from analog or digital channels.
Trig Menu Key -> Type -> Pattern -> Code Softkey help informationPress this softkey to set the value of the selected channel.* X - Don't care* 1 - One* 0 – Zero
Trig Menu Key -> Type -> Interval -> Source Softkey help informationThis softkey lets you can set interval trigger source to any analog or digital channel input.
Trig Menu Key -> Type -> Interval -> Slope Softkey help informationPress this softkey to set the trigger slope to rising or falling.
Trig Menu Key -> Type -> Interval -> When Softkey help informationSet the scope to trigger on a periodical signal with interval time that is:* equal to (=) the specified time.* not equal to (≠) the specified time.* greater than (>) the specified time.* less than (<) the specified time.
Trig Menu Key -> Type -> Interval -> Time Softkey help informationPress this softkey and rotate the V0 knob to adjust the interval time.
Edited by WisdomAugust at 2021-4-13 10:08
Trig Menu Key -> Type -> Runt -> Source Softkey help informationSets the runt trigger source to any analog channel input.
Trig Menu Key -> Type -> Runt -> Polarity Softkey help informationPress this softkey to change the runt polarity settings, you can trigger on positive or negative polarity.Trig Menu Key -> Type -> Runt -> When Softkey help informationThis qualifier softkey lets you trigger on a runt pulse whose times are:* equal to (=) the specified time.* not equal to (≠) the specified time.* greater than (>) the specified time.* less than (<) the specified time.
Trig Menu Key -> Type -> Runt -> Width Softkey help informationPress this softkey and turn the V0 knob to adjust the runt width. Setting range: 20ns - 10s.
Trig Menu Key -> Type -> Runt -> Level Softkey help informationPress this softkey to select the threshold levels: Level A, Level B, or both of them. Then, turn the V0 knob to adjust.
Trig Menu Key -> Type -> Delay -> Source 1 Softkey help informationPress this softkey to set edge trigger source 1 to any analog or digital channel.
Trig Menu Key -> Type -> Delay -> Slope 1 Softkey help informationSet the trigger slope 1 for the selected trigger source 1 to rising or falling logic.
Trig Menu Key -> Type -> Delay -> Source 2 Softkey help informationPress this softkey to set edge trigger source 2 to any analog or digital channel.
Trig Menu Key -> Type -> Delay -> Slope 2 Softkey help informationSet the trigger slope 2 for the selected trigger source 1 to rising or falling logic.
Trig Menu Key -> Type -> Delay -> When Softkey help informationPress this softkey to select the delay type.The scope can be triggered when time differences between signals are:* equal to (=) the specified time.* not equal to (≠) the specified time.* greater than (>) the specified time.* less than (<) the specified time.
Trig Menu Key -> Type -> Delay -> Width Softkey help informationPress this softkey and use the V0 knob to preset the time. Settings range: 20ns - 10s.